ASTM A240 TP410 Stainless Steel Plates & Sheets Manufacturer, Exporter & Stockist
introduction
Dinesh Tube (India) is one of the leading manufacturer, exporter & suppliers of premium quality ASTM A312 TP 410 Stainless Steel Plates & Sheets . We offer all our plates & sheets in different sizes, grades, diameters and types like seamless, welded & fabricated. SS 410 plates & sheets are used widely in critical industrial applications like construction, oil & gas, petrochemical, natural gas, general industrial applications, etc. These plates & sheets are available in various sizes, shapes as per the requirements of our clients. These SS 410 Plates & Sheets are offered at very reasonable rates to our clients
Key Specifications Of SS 410 plates & sheets:
Specification : |
||
| Standards | : | ASTM A240 / ASME SA240 |
| Size | : | 1/4″ to 4″ |
| Range | : | 5mm To 150mm |
| Thickness | : | 4.0mm – 100mm |
| Hardness | : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) |
Chemical Composition Of Stainless Steel 410 Plate & sheets (UNS S41000 plates & sheets):
| Grade | C | Mn | Si | P | S | Cr | MO | Ni | N | |
| 410 | Min | – | – | – | – | – | 11.5 | – | – | – |
| max | 0.15 | 1.00 | 1.00 | 0.040 | 0.030 | 13.5 | – | 0.75 | – |
Mechanical properties Of SS 410 plates & sheets(UNS S41000 plates & Sheets):
| Tempering Temperature (0C) | Tensile Strength (MPa) | Yield Strength 0.2% Proof(MPa) | Elongation (% in 50mm) | Hardness Brinell (HB) | Impact Charpy V (J) |
| Annealed * | 480 min | 275 min | 16 min | – | – |
| 204 | 1310 | 1000 | 16 | 388 | 30 |
| 316 | 1240 | 960 | 14 | 325 | 36 |
| 427 | 1405 | 950 | 16 | 401 | # |
| 538 | 985 | 730 | 16 | 321 | # |
| 593 | 870 | 675 | 20 | 255 | 39 |
| 650 | 755 | 575 | 23 | 225 | 80 |
| * Annealed properties are specified for Condition A ofASTM A276, for cold finished bar. # Due to associated low impact resistancethis steel should not be temperedin the range 425-6000C |
|||||
Grade specifications Of SS 410 Plates & Sheets (UNS S41000 plates & sheets:
| Grade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS | ||
| BS | En | No | Name | ||||
| 410 | S41000 | 410S21 | 56A | 1.4006 | X12Cr13 | 2302 | SUS 410 |
| These comparisons areapproximate only. The list is intended as a comparison of functionally similarmaterials not as a schedule of contractual equivalents. Ifexact equivalents are needed original specifications must be consulted. | |||||||
Types Of SS 410 Plates (UNS S41000 Plates):
• Stainless Steel 410 Sheets
• Stainless Steel 410 Shim Sheets
• Stainless UNS S34709 Plates
• SS 410 Perforated Sheet Suppliers
• SS 410 Chequered Plate Dealer
• SS 410 Plain Sheets Stockholder
• Stainless UNS S34709 Circles
• Stainless Steel 410 Shim Sheets
• Stainless UNS S34709 Plates
• SS 410 Perforated Sheet Suppliers
• SS 410 Chequered Plate Dealer
• SS 410 Plain Sheets Stockholder
• Stainless UNS S34709 Circles
• Stainless Steel 410 Plates
• Stainless Steel 410 Cold rolled sheet
• Stainless Steel DIN 1.4301 Rings
• Stainless Steel 410 Strips
• SS 410 Foils
• ASTM A240 Stainless Steel 410 Coils
• ss 410 Plates
• Stainless Steel 410 Cold rolled sheet
• Stainless Steel DIN 1.4301 Rings
• Stainless Steel 410 Strips
• SS 410 Foils
• ASTM A240 Stainless Steel 410 Coils
• ss 410 Plates
WhatsApp Us