SMO 254 Buttweld Fittings
ANSI/ASME B16.9, MSS-SP-43, ASTM A403 SMO 254 Buttweld Pipe Fittings Manufacturer, Exporter & Suppliers.
ASTM A403 254 SMO End Cap / ASTM A403 254 SMO Elbow Manufacturer & Exporter
ASTM A403 254 SMO Concentric Reducer Exporter, Manufacturer & Suppliers
SMO 254 UNS S31254 Seamless Butt weld Pipe Fittings, SMO 254 Welded Butt weld Pipe Fittings Suppliers in India.
We are Manufacturers, Exporters and Supplier of Wide range SMO 254 Buttweld Pipe Fittings, ASTM A403 254 SMO Concentric Reducer, ASTM A403 254 SMO Elbow that are using high quality raw materials in mumbai, India. These SMO 254 Buttweld Fittings is categorised in austenitic stainless steel with a Molybdenum content not less than 6% , that is why this alloy is also called 6Mo. We are manufactured these Buttweld Pipe Fittings as per the national & intrenational quality standards. These are available in various application industry like Pharmaceutical industry, Oil Refineries, chemical industry etc. These SMO 254 Buttweld Pipe Fittings are available in various specification & thickness as per clients requirements.
Specification :
Range | : | 3/4″ – 12″ |
Standards | : | ASTM A403 / ASME SB403 |
Type | : | Seamless / Welded / Fabricated |
Schedule | : | SCH 10, SCH20, SCH30, SCH40 |
Dimensions | : | ANSI/ASME B16.9, B16.28, MSS-SP-43. |
Grades | : | UNS No. S31254 |
Types Of SMO 254 Butt weld Pipe Fittings :
• 90 & 45 Deg Elbows
• Long & Short Radius Elbows
• Equal & Unequal Tees
• Concentric & Eccentric Reducer
• Equal & Unequal Cross
• Bends
• Short & Long Stub Ends
• Pipe End Caps
• Piggable Bends
• Seamless Buttweld Pipe Fittings
• Welded Buttweld Pipe Fittings
• Split Tees
SMO 254 Buttweld Fittings STRUCTURALS CHEMICAL COMPOSITION
SMO 254 |
Ni |
C |
Mo |
Mn |
Si |
Fe |
Cu |
S |
P |
Cr |
17.5 – 18.5 |
0.02 max |
6 – 6.5 |
1 max |
0.8 max |
– |
0.5 – 1 |
0.01 max |
0.03 max |
19.5 – 20.5 |
SMO 254 Buttweld Fittings STRUCTURAL MECHANICAL and Mechanical PROPERTIES
Density |
Melting Point |
Yield Strength (0.2%Offset) |
Tensile Strength |
Elongation |
8.0 g/cm3 |
1320-1390 ℃ |
300 |
650 |
35 % |