Inconel Round Bars & Inconel Rods & Wires
Inconel werkstoff nr. 2.4816 Bars, Rods & Wires Manufacturer, Exporter & Suppliers in India.
ASME SB-166 / 446 / 408 Incoloy UNS N06600 Hexagon Bars, Wire Bobbin, Inconel Round Bars Suppliers.
Inconel werkstoff nr. 2.4816 Bars, Rods & Wires Manufacturer, Exporter & Suppliers in India.
ASME SB-166 / 446 / 408 Incoloy UNS N06600 Hexagon Bars, Wire Bobbin, Inconel Round Bars Suppliers.
Dinesh Tube (India) is one of the leading Manufacturers, Supplier and Exporters of high-quality Inconel / Incoloy Bars, Rods & Wires in Mumbai, India. Inconel Bars, Rods, Wires are available in special alloys like Inconel 600, Inconel 601, Inconel 625, Inconel 718, Inconel X-750, Incoloy 800, Incoloy 800H/ HT and Incoloy 825.
We are manufactured as per the international quality and safety standards. These Bars, Rods & Wire are widely used in various applications industry. We also offer these Products are available in different size, grades, specification & thickness as per the client’s requirements.
Range | : | 5 mm To 500 mm Dia in 100 mm TO 6000 mm Length available with NACE MR 01-75. |
Standard | : | ASTM / ASME SB 166, ASTM / ASME B 446 , ASTM / ASME B 637, ASTM B 511, ASTM B 408. |
Length | : | 100 mm To 3000 mm Long & Above |
Finish | : | Bright, Polish & Black |
Form | : | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc. |
Grade | : | Inconel 600 Bars – UNS N06600, Inconel 601 Rods – UNS N06601, Inconel 625 Wire – UNS N06625, Incoloy 800 Bars – UNS N08800, Incoloy 800H / HT Rods – UNS N08810, Incoloy 825 Round Bars– UNS N08825 |
STANDARD | WERKSTOFF NR. | UNS | JIS | AFNOR | BS | GOST | EN | OR |
Inconel / Incoloy | 2.4816 | N06600 | NCF 600 | NC15FE11M | NA 13 | МНЖМц 28-2,5-1,5 | NiCr15Fe | ЭИ868 |
Grade |
Inconel 718 |
C |
0.08 max |
Mn |
0.35 max |
Si |
0.35 max |
Cu |
0.30 max |
S |
0.15 min |
Fe |
– |
Mo |
– |
Ni |
50.0 – 55.0 min |
Cr |
17.0 – 21.0 |
Inconel 601 |
|
Ni |
58.0 – 63.0 |
Cr |
21.0 – 25.0 |
Fe |
Balance |
Al |
1.0 – 1.7 |
C |
0.10 max |
Mn |
1.0 max |
S |
0.015 max |
Si |
0.5 max |
Cu |
1.0 max |
Element |
Inconel 625 |
Ni |
58.0 min |
C |
0.10 max |
Mn |
0.50 max |
Cu |
1.0 max |
S |
0.015 max |
Si |
0.50 max |
Cr |
20.0 – 23.0 |
Fe |
5.0 max |
Co |
1.0 max |
Mo |
8.0 – 10.0 |
Al |
0.40 max |
Ti |
0.40 max |
P |
0.015 max |
S |
0.015 max |
Grade |
718 |
Density |
8.2 g/cm3 |
Melting Point |
1350 °C (2460 °F) |
Tensile Strength |
Psi – 1,35,000 , MPa – 930 |
Yield Strength (0.2%Offset) |
Psi – 75,000 , MPa – 482 |
Elongation |
45 % |
Grade |
718 |
Density |
8.1 g/cm3 |
Melting Point |
1411 °C (2571 °F) |
Tensile Strength |
Psi – 80,000 , MPa – 550 |
Yield Strength (0.2%Offset) |
Psi – 30,000 , MPa – 205 |
Elongation |
30 % |
Element |
Inconel 625 |
Density |
8.4 g/cm3 |
Melting Point |
1350 °C (2460 °F) |
Tensile Strength |
Psi – 135,000 , MPa – 930 |
Yield Strength (0.2%Offset) |
Psi – 75,000 , MPa – 517 |
Elongation |
42.5 % |
Hardness (Brinell) |
– |