Inconel Fasteners

Inconel 600 Fasteners, Inconel 601 Fasteners, Inconel 625 Fasteners, Inconel 718 Fasteners Suppliers in India.

Inconel werkstoff nr. 2.4816 Fasteners, Inconel Screws, Hex Head Bolts Manufacturer, Exporter & Suppliers.

ASME SB160 / SB164 / SB574 Inconel UNS N06600 Bolts, Inconel Nuts, Inconel Washers, Hex Bolts, Socket Screw Suppliers.

Dinesh Tube is one of the leading Manufacturers, Supplier and Exporters of high quality Inconel / Incoloy Fasteners in Mumbai, India. We also offer these Inconel / Incoloy Fasteners are available in special alloys like Inconel 600, Inconel 601, Inconel 625, Inconel 718, Inconel X-750 etc. We are manufactured as per the international quality and safety standards. These Fasteners are available in different size,grades, specification & thickness as per the clients requirements. These Inconel Fasteners are used in various application industry such as Chemical industry, oil & gas industry, Nuclear Reactors, Aerospace and marine engineering, Phosphoric and Sulphuric acid plants etc.

Specification :

Standard	:	ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472
Size	:	M10 TO M100
Length	:	UPTO 1 METERS
Grade	:	Inconel 600 – UNS N06600, Inconel 601 – UNS N06601, Inconel 625 – UNS N06625, Incoloy 800 – UNS N08800, Incoloy 800H / HT – UNS N08810, Incoloy 825 – UNS N08825
Specification	:	IS, BS, ASTM
Type	:	Bolts, nuts, Washers, Anchor Fasteners, Stud Bolts, Eye Bolt, Stud, Threaded Rod, Cotter Pin, Socket Screw, Fine Fasteners & Spares, Foundation Fasteners, etc.

STANDARD	WERKSTOFF NR.	UNS	JIS	AFNOR	BS	GOST	EN	OR
Inconel / Incoloy	2.4816	N06600	NCF 600	NC15FE11M	NA 13	МНЖМц 28-2,5-1,5	NiCr15Fe	ЭИ868

Types Of Inconel 600/ 601/ 625/ 718 Fasteners :

Bolts, Nuts, Screws, Sockets, Studs, Screw, Hex Set Screw, Socket Screw, Cap Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Spring Washers, Studs, Anchors, Marine Anchors, Nut, Hexagon Nut, Hex Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Socket Hexagon Head Screw Anchor Bolt, U- Bolts, J Bolts, Mushroom Head Square Neck Bolts, T-Head Bolts, Wing Screw, Eye Bolt, Foundation Bolts, Structural Bolts.

Chemical Compositions of Inconel 600/ 601 Fasteners

Grade	C	Mn	Si	P	S	Cr	Cu	Ni	Fe
Inconel 600	0.15 max	1 max	0.5 max	–	0.015 max	14 – 17	0.50 max	72 min	6.0-10.0
601	min.	–	–	–	Bal	–	21.0	–	58.0
601	max.	0.10	1.0	0.5	Bal	0.015	25.0	1.0	63.0

Chemical Compositions of Inconel 625/ 718 Fasteners

	Inconel 625
Ni	58.0 min
Cr	20.0 – 23.0
Fe	5.0 max
C	0.10 max
Mn	0.50 max
Si	0.50 max
Mo	8.0 – 10.0
Co	1.0 max
Al	0.40 max
Ti	0.40 max
Nb + Ta	3.15 – 4.15
P	0.015 max
S	0.015 max
	Inconel 718
Ni	50 – 55
Fe	Bal
Cr	17 – 21
Cu	0.3 max
Mo	2.8 – 3.3
Nb	4.75 – 5.5
C	0.08 max
Mn	0.35 max
P	0.015 max
S	0.015 max
Si	0.35 max
Ti	0.65 – 1.15
Al	0.2 – 0.8
Co	1.0 max
B	0.006 max

Inconel 600/ 601 Fasteners Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.47 g/cm3	1413 °C (2580 °F)	Psi – 85,000 , MPa – 585	Psi – 35,000 , MPa – 240	30 %
Grade	Tensile Strength (MPa) min	Yield Strength 0.2% Proof (MPa) min	Elongation (% in 50mm) min	Hardness
Grade	Tensile Strength (MPa) min	Yield Strength 0.2% Proof (MPa) min	Elongation (% in 50mm) min	Rockwell B (HR B) max	Brinell (HB) max
601	Psi – 95,000 , MPa -655	Psi – 45,000 , MPa – 310	40	–	–

Inconel 625/ 718 Fasteners Mechanical & Physical Properties

Density	8.4 g/cm3
Melting Point	1350 °C (2460 °F)
Tensile Strength	Psi – 135,000 , MPa – 930
Yield Strength (0.2%Offset)	Psi – 75,000 , MPa – 517
Elongation	42.5 %
Density	8.2 g/cm3
Melting Point	1350 °C (2460 °F)
Tensile Strength	Psi – 135,000 , MPa – 930
Yield Strength (0.2%Offset)	Psi – 70,000 , MPa – 482
Elongation	45 %