SS DIN 1.4835 Sheets Dealer, DIN 1.4835 Plates, Stainless Steel UNS S30815 Shim Sheets, UNS S30815 Strips, 253MA Hot Rolled Plates, Stainless Steel 253 MA #8 Mirror Finish Plates, ASTM A240 SS 253 MA Cold Rolled Sheets, 253 MA Stainless Steel Chequered Plates Stockists, SS 253 MA 2B Finish Plates, ASME SA240 SS 253 MA Sheets and Plates Supplier in India.


253MA Sheets & Plates are having excellent properties to offer because of which it is considered as the right selection for various applications. The properties are resistant to stress corrosion cracking, crevice corrosion, pitting, erosion-corrosion, oxidation, etc. It is having high tensile strength, rugged construction, long functionality, good surface finishes, heat resistance, etc.

253MA Sheets & Plates are delivered to the clients only when it is well tested. The tests done on are effective and help to identify the quality and strength of the sheets/plates. Few tests are ultrasonic tests, micro tests, chemical tests, flattening tests, etc.

253 MA Stainless Steel Sheets and Plates Equivalent Grades

SS 253 MA S30815 1.4835

Specification of Stainless Steel 253 MA Sheets and Plates

Stainless Steel Sheets and Plates Specification : ASTM A240 / ASME SA240
Dimension Standard : JIS, AISI, ASTM, GB, DIN, EN, etc
Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Thickness : 0.3 mm to 120 mm
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc.
Surface Finishing : Hot rolled plate (HR), Cold rolled sheet (CR),2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, Chequered, embossed, hair line, sand blast, Brush, etching, SATIN (Met with Plastic Coated) etc.

Chemical Composition of Stainless Steel 253 MA Sheets and Plates

  Cr Ni Si C Mn P S N Ce Fe
MIN 20.00 10.00 1.40 0.05 0.14 0.03 Balance
MAX 22.00 12.00 2.00 0.10 0.80 0.04 0.03 0.20 0.08  

Mechanical Properties Of Stainless Steel 253 MA Sheets and Plates

Grade Tensile Strength (MPa) min Yield Strength 0.2% Proof (MPa) min Elongation (% in 50mm) min Reduction Area,%
253 MA 87,000 45,000 40 50