Pipes & Tubes
  Pipe Fittings
  Coils
  Fasteners
  Flanges
  Plates
  Round Bars
  Nickel Alloy
  Valves
 
» Ball Valve
» Butterfly Valve
» Knife Gate Valve
» Gate Valve
» Globe Valve
» Diaphragm Valve
» Non Return/Check Valve
» Dual Disc Check Valve
» Single Disc Spring Loaded Check Valve
» Forged Steel Gate Valve
» Forged Steel Globe Valve
» Forged Steel Check Valve
  Non Ferrous Metals


Valves
Butterfly Valve

Dinesh Tube (India) Butterfly Valves, wafer type with integrally moulded elastomer body sleeve are designed for longer life and trouble free performance. Integrally moulded sleeve ensures perfect resistance against friction between the disc and the sleeve.

Special Features

  • • Integrally moulded elastomer liner restricts dislocation of seat and ensures longer life.

  • •  Flat surface on the disc and the liner at the top and bottom ensures perfect sealing between body, disc and stem.

  • •  Elastomer body liner is extended deep into the top and bottom of disc shaft passages with integral 'O' ring to ensure no working media contacts the body material, thus ensures longer life for body.

  • •  A primary seal provided at the top end of the body prevents entry of any foreign particles in the Valve, thus ensures longer life for Stem and smooth operation.

  • •  Valve disc is designed to ensure smooth straight through flow, which reduces pressure drop across the Valve.

  • •  Close tolerance maintained between the liner, disc and stem reduces operation torque and ensures smooth and easy operation.

  • •  Integrally moulded liner got integral gasket with it at both ends of the Valve which eliminates requirement of Valve mounting gaskets.

  • •  Designed and manufactured to conform BS 5155/API 609

  • •  Suitable to mount between flanges of ANSI B16.5 [150#] or BS-10 Table D/E

  • •  Pneumatic and Electrical actuated Valves are available on demand.

  • •  Top platform of the Valve is suitable to mount actuator or manual gearbox directly.

  • •  Flow Control Lever is provided to facilitate fine control of flow.

   Flanged Ends Valves - Three/Two Piece Desing

Matrial of Construction & Presure Temperature Rating
Service Body Material Disc. Material Sleeve Max. Working Pressure Max. Working Temp.
Liquids, Air, Water, Gas, Slurry, Powder, Fly Ash, Sea Water. C.I., S.G Iron C.I., S.G Iron, Nitrile ** 16 bar 90°C
CS, CF-8, CF-8M CF-8, CF-8M
CN-7M CN-7M
Steam, Hot Water, Gas, Powder, Slurry of abrasive nature. -do- -do- EPDM** 14 bar 120°C

Test Pressure
Rating Body Seat
PN 10 16 bar 10 bar
Pn 16 24 bar 16 bar



Dimensions in mm
Size N.B. A B C D E F G H
50 43 97 165 65 140 265 185 200
65 46 110 176 70 151 276 185 200
80 46 123 194 78 164 294 230 245
100 52 159 207 96 177 307 230 245
125 56 188 220 113 190 320 230 245
150 56 212 232 126 202 332 325 345
200 60 269 271 157 241 371 325 345
250 68 322 307 190 273 415 390 410
300 78 375 346 216 312 460 390 410


Butterfly Valve - Techanical Specification
Size Range
50 NB through 
600 NB
Pressure Rating
ANSI/BS 125#/150#
Type
Center Disc, Offset 
Disc. Fully Lined Body/ 
Unlined Body
End Connection
Wafer/ Lugged/ 
Flanged
Operation
Wrench/ Manual Gear/
Pneumatic
Port Opening
Full
Seat
Natural/ Neoprene/ 
Nitrile/ Silicon/ 
Vitone Rubber or PTFE
Disc
Solid-Dual shaft/ 
Single shaft
Gasket & Packing
Equivalent 
seat material
MOC
Ref Material of Construction & Pressure-Temperature Table
Design Code
API - 609/BS - 5155
Testing
API 598
Inspection
3rd Party/ Client/ 
Manufacturer

     
   
   
© copyright 2011 Dinesh Tube (India), website designed & developed by www.mesotek.com